HOT ROLLED SHEET PILES
Steel Grades
| CLASSIFICATION | YIELD POINT (Min) | TENSILE STRENGTH |
ELONGATION (Min) |
|
|---|---|---|---|---|
|
MPa |
MPa |
|||
| ASTM A252 | Grade 2 | 240 | 415 | 14 |
| ASTM A252 | Grade 3 | 310 | 455 | – |
| ASTM A572 | Grade 42 | 290 | 415 | 20 |
| ASTM A572 | Grade 50 | 345 | 450 | 18 |
| ASTM A572 | Grade 55 | 380 | 485 | 17 |
| ASTM A572 | Grade 60 | 415 | 520 | 16 |
| ASTM A572 | Grade 65 | 450 | 550 | 15 |
| CSA 40.21 | 260W | 260 | 590 | 20 |
| CSA 40.21 | 300W | 300 | 620 | 20 |
| CSA 40.21 | 350W | 350 | 650 | 19 |
| CSA 40.21 | 400W | 400 | 690 | 16 |
| GB/T 700 | Q235B | 235 | 500 | 26 |
| GB/T 1591 | Q345B | 345 | 630 | 20 |
| GB/T 1591 | Q345C | 345 | 630 | 21 |
| GB/T 1591 | Q390B | 390 | 650 | 20 |
| GB/T 1591 | Q420B | 420 | 680 | 19 |
| JIS A5528 | SY295 | 295 | 490 | 17 |
| JIS A5528 | SY390 | 390 | 540 | 15 |
HOT ROLLED SHEET PILES
Tolerances
| TOLERANCE | YIELD POINT (Min) | ||
|---|---|---|---|
| MASS | ± 5% | ||
| LENGTH | ± 200mm / ± 7.87402″ | ||
| HEIGHT | ± 7mm / ± 0.275591″ | ||
| THICKNESS | ≤ 8.5 mm / ≤ 0.334646″ | ± 0.5 mm / ± 0.019685 | |
| > 8.5 mm / > 0.334646″ | ± 6% | ||
| WIDTH SINGLE | ± 2% | ||
| WIDTH OF PAIR | ± 3% | ||
| STRAIGHTNESS | ≤ 0.2% of the length | ||
| SQUARENESS OF END | ± 2% of the width | ||